i_am_chris
10-31-2004, 07:25 PM
Hi,
Got a bunch of Simpson ABA Post Bases to mount to concrete footings using a sunken bolt. The nut requires a 3/4" wrench. The problem is my open ended 3/4" wrench won't fit into the standoff plate slot so that I can adjust when the post is on. I can crank it down with a socket prior to post installation, but...if I need to tweak after the install I'm kinda screwed (pun inteneded). Any suggestions on a wrench that will work for this?
Got a bunch of Simpson ABA Post Bases to mount to concrete footings using a sunken bolt. The nut requires a 3/4" wrench. The problem is my open ended 3/4" wrench won't fit into the standoff plate slot so that I can adjust when the post is on. I can crank it down with a socket prior to post installation, but...if I need to tweak after the install I'm kinda screwed (pun inteneded). Any suggestions on a wrench that will work for this?