Tom_E
10-22-2006, 05:55 AM
I have been given a roll of electrical wire. I'm not sure of where I can use it because I don't have a chart that tells me about it. Markings on it as follows.
ES1583 THHN (UL) AWG 6 CU Type MTW or THWN-2 or THHN or Gasoline/Oil Resistant 11 or AWM 600V VW-1---c(UL) T-90 Nylon or TWN 75 FT1
On the reel are two labels, one on top the other. The bottom one is the Mgrs . I can only see part of it. That part says " 6-19 CU THHN
That said, where I would like to use it, is to run a 60 ( or if possible a 100) amp sub panel 75 feet away and run it through conduit.
Is this feasible ?
ES1583 THHN (UL) AWG 6 CU Type MTW or THWN-2 or THHN or Gasoline/Oil Resistant 11 or AWM 600V VW-1---c(UL) T-90 Nylon or TWN 75 FT1
On the reel are two labels, one on top the other. The bottom one is the Mgrs . I can only see part of it. That part says " 6-19 CU THHN
That said, where I would like to use it, is to run a 60 ( or if possible a 100) amp sub panel 75 feet away and run it through conduit.
Is this feasible ?